GB Instruments Wire-Tracker GET-4110K, LAN-Tracker GET-4220K User Manual

6
sensitive to voltage and current
pulses such as air bags, electronic
control modules, etc.
• Do not connect the transmitter to
circuits for power-train, engine,
transmission, ABS brakes or any
other electronic control modules.
Locate the fuse box in the automobile.
Remove the appropriate fuse for the
wiring being traced. This will also
disconnect the power from the battery.
Insert the fuse plug into the non-
energized side of the fuse receptacle.
Trace the wiring as described above.
To boost the signal, the black alligator
clip may be connected to a suitable
ground, such as the car frame.
(GET-4220K Only)
To prevent interference, remove all
connections from the data network to
any outside source. Use the RJ-45
(data) plug for insertion into a
standard data/LAN jack.
Tracing Data/LAN Wiring

GB Instruments Wire-Tracker GET-4110K, LAN-Tracker GET-4220K Specifications

General

Brand	GB Instruments
Model	Wire-Tracker GET-4110K, LAN-Tracker GET-4220K
Category	GPS
Language	English