GB IDAN - Page 41

EN
41
Use the FIRST hole
that will lock the Load
Leg Foot rmly against
vehicle oor
11
12
Install load leg, see page 35.
Check that the Recline Angle
remained in the appropriate range for
the child's weight. If not, remove Base,
adjust recline angle and reinstall. See
page 37.
To remove, push button on LATCH
connector then unhook from the
anchor point.
You may need to loosen the
tension on the LATCH connector by
loosening the LATCH strap adjuster.
11
12
13
13