GDC SX-2000AR - After the Upgrade

13
Figure 6 Press password to log in SMS.
4
The below screen will show up after rebooting, and requires inputing the
password to enter SMS interface.
7. AFTER THE UPGRADE
Figure 7 Server eth1.
1
After the upgrade is completed, powercycle both the server and projector
with IMB.
2
IMB marriage and service door clearance are recommended to be done on
the server SMSConfigurationMaintenance AccessGeneralIMB
(For IMB marriage, please refer to the SX-2000 Installation Manual as
process will depend on projector manufacturer and software version).
4
2