What causes 'Sample line blocked' on GE HEALTHCARE Medical Equipment and how to fix it?
If the GE HEALTHCARE Medical Equipment displays 'Sample line blocked', the sampling line inside or outside the monitor is blocked, or the water trap is occluded. Change the sampling line and water trap.
What causes 'NIBP cuff overpressure' on GE HEALTHCARE Medical Equipment?
If the GE HEALTHCARE Medical Equipment displays 'NIBP cuff overpressure', it means the cuff is squeezed during measurement and pressure safety limits are exceeded. Check the cuff, hose, and tubes, and restart the measurement.
What to do if GE HEALTHCARE B20 Medical Equipment displays 'Check sample gas out'?
If the GE HEALTHCARE Medical Equipment displays 'Check sample gas out', the sample gas outlet is blocked. Remove the blockage from the sample gas outlet.
What to do if GE HEALTHCARE B20 displays 'Entropy sensor check failed'?
If the GE HEALTHCARE Medical Equipment displays 'Entropy sensor check failed', it means the sensor has not passed the impedance check. Check sensor placement and attachment, press each electrode in the sensor, or replace the sensor.
General| Brand | GE HEALTHCARE |
|---|---|
| Model | B20 |
| Category | Medical Equipment |
| Language | English |
Covers the procedures for starting and ending patient monitoring sessions safely.
Details the process of admitting a new patient and entering necessary demographic data.
Covers adjustments for alarm limits, volume, tones, and audio settings for customization.
Lists common error messages, their explanations, and recommended actions.
Addresses common issues with ECG signal quality, detection, and artifacts.
Provides troubleshooting steps for NIBP measurement issues and unstable values.
Guides on adjusting high and low heart rate alarm limits for patient monitoring.
Guides on connecting the SpO2 sensor to the patient and module correctly.
Guides on connecting the transducer, tubing, and catheter for IBP measurement.
Explains the importance and procedure for zeroing IBP transducers for accurate measurements.
Guides on adjusting IBP alarm sources and limits via the Alarms Setup menu.
Lists warnings and cautions related to temperature measurement and electrosurgery use.
Guides patient connections for E-miniC and CARESCAPE modules with airway adapters.
Lists warnings and cautions for Entropy measurement, including defibrillator precautions.
Guides on preparing the patient and placing Entropy sensors on the forehead.
To Next Page
