To Next PageTo Next Page
Need help?Do you have a question about the GE Multilin MM200 and is the answer not in the manual?
General| Category | Control Systems |
|---|---|
| Frequency | 50/60 Hz |
| Frequency Range | 45-65 Hz |
| Digital Inputs | 4 |
| Relay Outputs | 2 |
| Display | LCD |
| Mounting | Panel Mount |
| Humidity | 5% to 95% non-condensing |
| Voltage | 24-240V AC/DC |
| Current Rating | 1A, 5A |
| Input/Output | Digital Inputs, Relay Outputs |
| Communication Protocols | Modbus RTU |
| Communication | RS485 |
| Communication Ports | RS485 |
| Protocols Supported | Modbus RTU |
| Protection Functions | Overload, Ground Fault |
| Operating Temperature | -20° to 60 °C |
| Storage Temperature | -40° to 85 °C |
| Voltage Rating | 24-240 VAC/VDC |
| Enclosure Rating | IP54 |
Details physical installation, dimensions, and mounting procedures.
Covers electrical connections, terminal layouts, and wiring diagrams.
Explains the basic control panel functionality and LED indicators.
Details how setpoints are managed and their types including motor and CT settings.
Explains the thermal model, overload curve, and trip time calculation.
Outlines RS485 and Fieldbus communication options.
Details specifications for protection functions, digital inputs, and output relays.
Details power supply ranges and communication interface specifications.
Lists compliance tests, physical dimensions, and operating environment.
Explains the format for specifying MM200 relay configurations.
Declares compliance with industry standards for the MM200 unit.
