GE Security Simon XT User Guide

Bypassing a sensor allows you to open the sensor while the system is
armed. For example, if you Doors & Windows are armed and you want to
open your kitchen window but do not want to disarm the entire system, then
you can bypass the kitchen window sensor and then open the kitchen
window without causing an alarm. Bypassed sensors are automatically
unbypassed when the arming level is changed to a level where the sensor
is not active.
Bypassing
1. Press BYPASS and enter the master code.
2. Scroll up/down until you reach the sensor to be bypassed.
3. The display shows, for example, Sn 1 Front Door on the first line.
4. Press Enter to bypass (deactivate) the sensor.
5. When a sensor is bypassed, the panel displays Bypassed on the second line.
Unbypassing
1. Press BYPASS and enter the master code.
2. Scroll up/down to the sensor to be unbypassed. The sensor must be currently
bypassed.
3. Press Enter to unbypass (reactivate) the sensor.
4. The panel removes the word Bypassed from the second line of the display

GE Security Simon XT Specifications

General

Brand	GE Security
Model	Simon XT
Category	Security System
Language	English