8
1. Press and hold the SETUP button until the red indicator
stays on, then release the SETUP button.
2. Press and release the desired mode button (TV, VCR,
etc.). The red indicator blinks, then stays lit.
3. Enter the 4 digit code from the code tables (on
separate sheet). Note: after
a valid code entry, the red
indicator turns off. For an
invalid code, the red indicator
flashes.
4. With your device on, press
ON•OFF. If the device turns
off, no further programming
is required. Note: If some
buttons do not operate your
equipment, try one of the
other codes for your brand.
Direct Code Entry
Write your codes down here for easy reference later.
Device Device stored Code
TV TV
DVD
VCR
CBL/SAT
AUDIO
AUX
To Next Page
Loading...
