13
Remote does not operate your product.
• Press the device button of the product you want to control.
• Program the remote with a new code.
• Install new batteries. (You might have to reprogram your
remote after installing new batteries.)
• Remote may not be compatible with your product.
Remote does not operate some features of your product.
• Sometimes a particular code might operate some features but
not all. Try programing remote with a new code.
• Remote may not be able to operate all features of your product
or button names might be different than your product.
Red Indicator blinks after you program a product code.
• Remote did not accept the code.
• Try to program the code again or try a different code.
If you lose your codes or programming instructions, you can find
them available on our website: www.jascoproducts.com
Troubleshooting
To Next Page
Loading...
