LoadiNg arid USIHg the washer, Always follow fabric manufacturer's care label when laundering.
SortingWashLoads
Colors Soil Fabric Lint
Whites Heavy Delicates Lint Producers
Lights Normal EasyCare Lint Collectors
Darks Light Sturdy Cottons
ProperUseof Detergent
Add detergent and slart the washer betore adding
clothes so that the detergent can work efleclively.
U sing too little or too much detergent isa common
cause of lmmd U problems.
You can use less detergent if you have soft water, a
smaller load, or a lightly soiled load.
LoadingtheWasher
Load dry items loosely, no higher than the top
row of holes in the washer rob. When loading wet
items make sure you set the load/water level high
enough to allow the items to move fleely. Water
level shouldjust cover the clothes. To add items
after washer has started, push in (ycle knob and
submerge additional items next to the agitator.
(lose the lid and pull Cycle knob out to restart.
• Do not wrap large items like sheets around the
agitator.
• Do not wash fabrics containing flammable
materials (waxes, cleaning fluids, etc.).
• Agitation will not start with the lid up.
10
To Next Page
Loading...
