GE 24922 - Troubleshooting; Remote does not operate your device; Remote does not operate some features of your device; Red Indicator blinks and stays on after you program a product code

14
Remote does not operate your device.
• Pressthedevicebuttonofthedeviceyou
wish to control.
• Programtheremotewithanewcode.
• Installnewbatteries.(Youmighthaveto
reprogram your remote after installing
new batteries.)
• Remotemaynotbecompatiblewithyourdevice.
Remote does not operate some features of
your device.
• Sometimesaparticularcodemightoperatesome
features but not all. Try programing remote with a
new code.
• Remotemaynotbeabletooperateallfeaturesof
your device or button names might be different
than that of your original remote.
Red Indicator blinks and stays on after you
program a product code.
• Remotedidnotacceptthecode.
• Trytoprogramthecodeagainortry
a different code.
Remote Code is not available for a combo device
(e.g. TV/VCR)
• Seesectionforcontrollingcombodevices.
If you have any questions or would like
additional information please visit our web site
www.jascoproducts.com, or contact our
Technical Support Group at 1-800-654-8483.
Troubleshooting