GE 7FA.05 - Page 2

To Next Page

To Previous Page

GEK 116862 Inspection and Maintenance Instructions for 7FA.05 Gas Only and Dual Fuel Gas Turbines

ATTENTION

NOTES, CAUTIONS AND WARNINGS

Notes, Cautions and Warnings will be found throughout this Maintenance

Publication. It is important that the significance of each is thoroughly understood by

personnel using these Maintenance Procedures. Their definitions are as follows:

NOTE

Highlights an essential element of a procedure to assure correctness.

CAUTION

Indicates a procedure or practice, which if not strictly observed, could result in damage

or destruction of equipment.

WARNING

INDICATES A PROCEDURE OR PRACTICE, WHICH COULD RESULT

IN INJURY TO PERSONNEL OR LOSS OF LIFE IF NOT FOLLOWED

CORRECTLY.

ATTENTION

SAFETY

This publication is designed to provide safe procedures and processes for

accomplishing the maintenance instructions described herein. It is important,

therefore, that the warnings, cautions, and notes in these procedures be thoroughly

understood and observed by the personnel performing maintenance. Changes or

additions deemed necessary for proper maintenance and/or suggested safety

improvements should be submitted to the site or local GE Field Service

representative.

NOTE

All dimensions called for throughout the maintenance publication are in S.A.E.

units first, followed by metric (where applicable) in brackets [ ].