4–22 869 MOTOR PROTECTION SYSTEM – INSTRUCTION MANUAL
DEVICE CHAPTER 4: SETPOINTS
FLEXLOGIC OPERANDS
The following operands are added for CyberSentry.
LOGOUT, ORIGIN, TIMESTAMP: Warning (4) An event to indicate when a certain role
logged out or timed out.
RADIUS_UNREACH, ORIGIN,
TIMESTAMP:
Critical (2) RADIUS server is unreachable. Origin: RADIUS
server IP address and port number.
CLEAR_EVENT_RECORDS,
ORIGIN, TIMESTAMP:
Warning (4) Clear event records command was issued.
CLEAR_TRANSIENT_RECORDS,
ORIGIN, TIMESTAMP:
Notice (5) Clear transient records command was
issued.
CLEAR_FAULT_REPORTS,
ORIGIN, TIMESTAMP:
Notice (5) Clear fault reports command was issued.
CyberSentry FlexLogic Operand Description
AUTHENTICATION FAIL Operand set for Failed Authentication self test and
alarm
UNAUTH SETTING CHANGE ATTEMPT Operand set for unauthorized setting change action
RADIUS SRV UNAVAILABLE Operand set for RADIUS servers unavailable self test
Event Record Level Description
To Next Page
Loading...
