GE 889 - Page 85

CHAPTER 3: INTERFACES FRONT CONTROL PANEL INTERFACE
889 GENERATOR PROTECTION SYSTEM – INSTRUCTION MANUAL 3–7
Setpoints > Device > Front Panel > Default Screen (3-R1/R5)
Figure 3-8: Single Line Diagram example, see order code (3-R1/R5) for slot K
The breaker status color follows the Color Scheme setting (Setpoints > Device > Front Panel
> Display Properties > Color Scheme). The breaker and generator status color is based on
the following logic.
NOTE
NOTE:
The Unknown status has a white background with black text.
The parameters displayed in the Front panel screen example are as follows.
SLD Breaker Symbol Color Generator Status
Color
Scheme
Open
Color
Close
Color
Not
Configured
Unknown Disconnected Offline Online Tripped Unknown
Red
Red Green Orange White
Green
Green Red Orange White
Parameter Input for the value
Load Cur Metering\ Generator\ General\ Load Current
Unbln Metering\ Generator\ General\ Unbalance Current
Volt (L-L) Metering\ Ph VT Bnk1-J2\ J2 V AVG L-L
Freq Metering\ Frequency 1-J\ J2-3VT Frequency
V/ Hz Metering\ Volts per Hertz\ Volts Per Hertz 1
S: Metering\ Power 1\ Pwr1 Apparent
P: Metering\ Power 1\ Pwr1 Real
Q: Metering\ Power 1\ Pwr1 Reactive
PF Metering\ Power 1\Pwr1 PF