Panorama mode
Panorama Mode allows you to create a panoramic picture. The
camera will create a panoramic photo by stitching individual
images taken in panorama mode.
Follow these steps to create a panoramic picture:
1. Press the Mode button and use the Left/Right button
to select Panorama mode, then press the button to
conrm the setting.
2. Use the Left/Right button to select the direction of image
stitching, e.g. left to right or right to left. Then press the
button to conrm the setting; if no selection is made
the camera will default to left to right stitching after 2
seconds.
3. After the rst shot is taken, two target icons will appear on
the left and right side of the LCD screen. Pan the camera
and the circle icon on the screen will move towards the
square frame icon. When the circle icon and square frame
become green after overlapping, the camera will capture
the next picture automatically. Repeat the same step for
the third picture to nish the stitching.
The camera will then stitch the pictures into a panorama
automatically. Press the playback button to enter Playback
mode and review the panorama result.
After selecting Panorama mode, Flash, Self-timer,
Macro mode and Exposure Compensation can not be
adjusted.
Before ending the shooting sequence, pressing the
Delete button will cancel the shooting sequence.
Panorama Mode can stitch 2 or 3 pictures total.
To Next Page
Loading...
