53
Trim
The Trim setting allows you select an area of the photo you
want to keep and then save it as a new photo.
To trim a picture:
1. Select the
Trim setting from the menu.
2. Using the Left/Right buttons, locate the photo that you
want to trim and have it displayed on the LCD.
3. Use the zoom buttons and navigation buttons to adjust
the trimming box to t the location and size of the new
picture.
4. “Save Changes?” prompt will display after pressing the
button, select “O” to conrm the changes and save the
image, or select “X” to cancel the changes and return to
the previous page.
The image can not be trimmed again when it is trimmed
to 640X480.
HDR-High Dynamic Range
With the HDR function, pictures that are overexposed may be
corrected to optimize the highlights and lowlights captured to
more accurately represent the actual scene.
1. Select HDR setting in the
menu as described
previously.
2. Press the Left and Right button to nd a picture you
want to optimize and then select Conrm to perform
HDR optimization or select Return to go back to Playback
menu.
3. After HDR optimizing, the image will be saved as another
le with the icon as a prompt, the original le will still
remain in the memory.
To Next Page
Loading...
