64 65
The video output signal can be switched to NTSC or PAL to
accommodate dierent regional standards. The appropriate
setting will vary between regions.
NTSC: USA, Canada, Taiwan, Japan, etc.
PAL:
Europe, Asia (excluding Taiwan), Oceania, etc.
Note: The TV output will not perform properly if an
incorrect video system is selected.
Use this setting to congure your video system to your current
area.
1. Select the Video System in the Connection Setup menu.
2. Use the
Up/Down navigation buttons to select NTSC or
PAL. Then press the button to conrm.
Video System
Transmission
To Next Page
Loading...
