What to do if food does not bake properly in my GE AGBS45 oven?
If food isn't baking properly in your GE Ranges oven, make sure the oven controls are set correctly. Check that the rack position is correct and level. Ensure you are using the correct cookware of the proper size. The oven temperature may also need adjustment.
What to do if my GE AGBS45 appears not to work?
If your GE Ranges appears not to work, replace the fuse or reset the circuit breaker.
What to do if my GE Ranges oven appears not to work?
If your GE Ranges oven appears not to work, there are a couple of things you can check. First, a fuse in your home may be blown, or the circuit breaker tripped, so replace the fuse or reset the circuit breaker. Also, make sure the oven controls are properly set. If this does not solve the issue, verify that the oven is not in Sabbath Mode.
Why does my GE AGBS45 Ranges oven door glass look tinted?
This is normal for new GE Ranges. The inner oven glass has a heat barrier to reflect heat back into the oven, which may cause a tinted or rainbow color under certain light or angles.
What to do if food does not broil properly in my GE AGBS45 oven?
If food isn't broiling properly in your GE Ranges oven, ensure you've selected the appropriate broil mode and are using the correct rack position. If using aluminum foil on the broil pan, wrap it tightly and add slits to allow grease to drain.
Why doesn't my new GE AGBS45 Ranges cook like my old one?
If your new GE Ranges doesn't cook like your old one, remember it has a different cooking system, so it may cook differently. For the first few uses, follow your recipe times and temperatures carefully and use rack positions recommended in the Cooking Guide. If you still think your new oven is too hot or too cold, you can adjust the temperature yourself to meet your specific cooking preference.
Why does my GE AGBS45 Ranges oven take longer to preheat?
Cookware, food, and racks in the oven will cause differences in preheat times. Remove excess items to reduce preheat time.
What to do if my GE Ranges burners do not light?
If the burners on your GE Ranges aren't lighting, there are several potential causes: * The battery may be weak or dead (for cordless ranges), so replace the battery. * The plug on the range may not be fully inserted, so ensure it's plugged into a properly grounded outlet. * The gas supply may not be connected or turned on, so check the Installation Instructions. * A fuse in your home may be blown or the circuit breaker tripped, so replace the fuse or reset the circuit breaker. * Burner parts may not be replaced correctly, so refer to the Care and Cleaning section. * Burner slots may be clogged, so remove and clean the burners, checking for burned-on food or grease. * There may be food residue on the electrode, so lightly polish the flat tip of the electrode with a nail file...
Why is my GE Ranges oven not clean after the self-clean cycle?
If your GE Ranges oven is not clean after a clean cycle, it could be due to improperly set oven controls or a heavily soiled oven. Clean up heavy spillovers before starting the clean cycle. Heavily soiled ovens may need to self-clean again.
What to do if my GE Ranges has excessive smoking during broiling?
If you experience excessive smoking while broiling in your GE Ranges, lower the rack position of the food.
General| Number of Burners | 4 |
|---|---|
| Oven Capacity | 5.0 cu. ft. |
| Self-Cleaning | Yes |
| Convection Oven | No |
| Color | Stainless Steel |
| Fuel Type | Gas |
| Type | Freestanding |
| Width | 30 in |
To Next Page