10 49-7838
INSTALLATION INSTRUCTIONS
Installation Instructions
5. PREPARE WINDOW FOR
INSTALLATION
A. Measure the width of the window opening.
B. Mark the center line on the inside windowsill.
C. Apply the weather seals provided to the bottom,
top and sides of the window to the seal around
the perimeter of the air conditioner.
B
A
A. Width of window opening
B. Center line
Cut and apply
weather strip to
front and bottom
edge of window
frame.
Cut and apply
weather strip to
back edge of
the window sill.
Cut and apply
a weather strip
to side of the
curtain frame
(one on each
side).
4. PREPARE THE AIR CONDITIONER
A. Install the top mounting rail with 4 Type A screws
from the outside of the case.
B. Slide the side curtain panels into the side panel
rails.
C. Slide left and right side curtain frames into top
and bottom rails. Make sure that side curtains
snap into side of the frames.
Top
Mounting
rail
Bottom
mounting rail
Snap curtain
into frame
To Next Page
Loading...
Need help?
General
