GE ApexPro T14 User Manual

Maintenance
2001989-351A ApexPro™ 4-9
NOTE
Drying times may vary based on the environmental conditions.
8. Take care not to let fluid pool around connection pins. If this should happen, blot
dry with a soft, lint-free cloth.
9. Do not use excessive drying techniques, such as oven, forced heat or sun drying.
Sterilizing
NOTE
EtO sterilization is not recommended, but may be required for cables and
leadwires. Frequent sterilization will reduce the useful life of cables and
leadwires.
Sterilize with ethylene oxide gas (EtO) at a maximum temperature of 50° C (122° F).
After EtO sterilization, follow the recommendations from the sterilizer manufacturer
for required aeration.
Storage
 Store in a dry well-ventilated area.
 Vertically hang cables and leadwires.
 Do not coil leadwires or cables tightly around any medical device.

GE ApexPro T14 Specifications

General

Brand	GE
Model	ApexPro T14
Category	Medical Equipment
Language	English