GE Proteus XR/a - User Manual

Questions and Answers

D
Dr. Christina MaldonadoAug 13, 2025
What to do if GE Proteus XR/a Medical Equipment shows faulty operation?
- B
  Beverly BlanchardAug 14, 2025
  If your GE Medical Equipment is showing faulty operation, the solution depends on the cause. If it's due to internal causes like component deterioration or connection degradation, or external causes like faulty communication or severe interference, press the reset key. If the issue reappears, stop the exam immediately and call GEMS Service, providing the error code and the circumstances.
C
Clifford SalazarAug 18, 2025
How to fix operator errors on GE Medical Equipment?
- C
  Christopher AndersonAug 18, 2025
  If you're experiencing operator errors on your GE Medical Equipment due to inadequate parameter selection, inadequate AEC cell choice, excessively closed or open collimator blades, premature release of the exposure switch, or the x-ray room door being open, press the reset key.
C
Craig LeonardAug 21, 2025
What to do when the reset key flashes with a buzzer and error code replacing rad parameter on GE Proteus XR/a Medical Equipment?
- K
  Kristopher BellAug 21, 2025
  When the reset key flashes with a buzzer, and an error code replaces the rad parameter on your GE Medical Equipment, record the error code and cancel the inhibit by pressing the Reset key.
E
Emma CamposAug 25, 2025
What should I do if the reset key flashes with a buzzer and error code replacing rad parameter on GE Medical Equipment due to a faulty operation?
- P
  pacealfredAug 26, 2025
  If the reset key flashes with a buzzer and an error code replaces the rad parameter on your GE Medical Equipment due to a faulty operation, continue the exam. However, if the fault recurs immediately, stop the exam and call field service. If the fault recurs intermittently, record all occurrences and call field service.
L
lopezjonathanAug 28, 2025
What should I do if the reset key flashes with a buzzer, but there is no error code, and it's due to sporadic faulty operation on GE Proteus XR/a?
- J
  jacksonjamesAug 28, 2025
  If the reset key flashes with a buzzer but shows no error code, and it's due to sporadic faulty operation, cancel the inhibit by pressing the Reset key. Remember to record all occurrences and call field service.
L
ljohnstonSep 1, 2025
What to do if the inhibition light is flashing on GE Proteus XR/a?
- L
  Linda JacksonSep 1, 2025
  If the inhibition light is flashing on your GE Medical Equipment, close the x-ray room door.
C
Crystal MuellerSep 5, 2025
What to do if inhibition light is lit together with flashing of parameter on GE Proteus XR/a?
- M
  Megan WilliamsSep 5, 2025
  If the inhibition light is lit together with a flashing parameter following a series of exposures on your GE Medical Equipment: 1) Wait for the indicator to go out before resuming work. 2) Reduce mAs, mA, and ms parameters, or reduce the work rate.
M
Melinda KingSep 9, 2025
What to do when the reset key flashes with a buzzer, but there is no error code, and the exposure is underexposed on GE Proteus XR/a?
- J
  josephgonzalezSep 9, 2025
  If the reset key flashes with a buzzer and no error code, and the exposure is underexposed: 1) Open the collimator or change the measurement cell selection. 2) Cancel the inhibit by pressing the Reset key.

Summary

X-Ray Protection and Safety Guidelines

Certified Electrical Contractor Statement

Statement regarding requirements for licensed electrical contractors.

Regulatory Compliance Information

Details compliance with various medical device directives and standards.

Electromagnetic Compatibility (EMC) Guidance

Information on the product's conformity with EMC standards and guidance.

Comprehensive Safety Precautions

Comprehensive safety guidelines, warnings, and precautions for operating the equipment.

Emergency Procedures and Operational Checks

Guidelines for handling emergencies and performing routine operational checks.

Approved Operating Procedures and Accessories

Instructions for using approved procedures and accessories for safe operation.

Planned Maintenance and Service

Revision History

Records changes and updates made to the manual over time.

Qualified Service and Periodic Maintenance

Information on qualified service personnel and required periodic maintenance schedules.

Equipment Recycling Guidelines

Guidelines for recycling packing materials and end-of-life equipment.

System Operation and Console

Quick Start Procedures

Initial steps for powering on and operating the system.

Setting Technique Parameters

Guides for setting APR, manual, and AEC techniques for exposures.

System Symbols and Warnings

Explanation of symbols, warnings, and labels used on the equipment.

System Description and HHS Compliance

Overview of the system, its components, and HHS compliance.

System Start Up and Shut Down

Procedures for safely starting up and shutting down the Proteus XR/a system.

Daily Warm-Up and System Status

Procedures for daily warm-up and understanding system status indicators.

Radiography Control Key Usage

Details on using the handswitch and console for radiography control.

System Console Interface

Detailed guide to the Proteus XR/a system console and its interface.

Console Parameter and Technique Selection

Areas for selecting parameters, techniques, and AEC settings.

Console Technique Selection

Interface for selecting kV, mAs, mA, and exposure time.

Console Error Messages and Indicators

Displays informational messages, error codes, and indicator lights.

Anatomical Programming (APR) and Procedure Edit

Using APR for preset protocols and editing procedures.

Automatic Exposure Control (AEC) Operation

How to use the optional AEC feature for radiographic exposures.

AEC Density Compensations

Table detailing density correction scales and their specifications for AEC.

Procedure Edit Functionality

Program for editing and storing predefined X-ray procedure parameters.

Procedure Edit Category and Procedure Screens

Screens for naming or changing categories and editing procedure details.

Procedure Edit Save and Retrieve

Process for saving and retrieving procedure edits to/from a diskette.

System Application and Technique Selection

Details system applications and how to select techniques.

Parameter Adjustment and Exposure

Steps for changing parameters and taking exposures.

Console Indicator Lights

Explanation of console indicator lights and their meanings.

APR Operations

Procedures for using the Anatomical Programming (APR) feature.

System Components: Table, Suspension, and Collimators

Table Safe Operation Precautions

Essential safety precautions for operating the radiographic table.

Table Introduction and Components

General overview and description of the Proteus XR/a table components.

Table Operation Procedures

Instructions for table emergency stop, movement, and locking.

Cassette Tray Operation

How to operate the cassette tray for loading and removal.

Overhead Tube Suspension System

Details on the Proteus XR/a overhead tube suspension system.

Telescopic Column and Carriage

Description of the telescopic column and carriage assembly.

X-ray Tube Support and Rotation

Information on supporting and rotating the X-ray tube.

X-ray Tube Angulation

How to angulate the X-ray tube and its lock mechanism.

Over Head Tube Suspension User Interface

Interface controls for positioning and operating the tube suspension.

Automatic Collimator Operation

Operational controls for the Proteus XR/a automatic collimator.

ACSS Multileaf Collimator Display

Explains the display information on the ACSS multileaf collimator.

Multileaf Collimator Bottom View

Details the controls and features on the bottom view of the multileaf collimator.

Multileaf Collimator Rear View

Details the controls and features on the rear view of the multileaf collimator.

Collimator Lamp Replacement

Procedure for changing lamps on the multileaf collimator.

Collimator Rotation

Instructions for rotating the collimator around its vertical axis.

Manual Collimator Controls

Operational controls for the optional manual collimator.

Eclipse Proteus Collimator

Description of the Eclipse Proteus Collimator and its specifications.

Eclipse Collimator Display

Information displayed on the Eclipse Proteus Collimator.

Eclipse Collimator Bottom View

Details controls and features on the bottom view of the Eclipse Proteus Collimator.

Eclipse Collimator Rotation

Instructions for rotating the Eclipse Proteus Collimator.

Collimator Lamp Replacement

Procedure for replacing lamps in the collimator assembly.

Wall Stand Components and Operation

Description and operation of the Proteus XR/A Wall Stand.

SG120 Wall Stand Components

Description of the Proteus XR/A SG120 Wall Stand components.

SG120 Wall Stand Applications and Operation

Applications and operating procedures for the SG120 Wall Stand.

SG120 Cassette Management and Alignment

Managing cassettes, AEC, alignment, and front panel access on SG120.

SG120 Bucky Rotation and Angulation

Instructions for rotating and angulating the SG120 bucky assembly.

SG120 Auto Exposure Control Requirements

Requirements for using Auto Exposure Control (AEC) with the SG120 Wall Stand.

System Accessories

List and installation of available accessories for Proteus XR/a systems.

Patient Hand Grips and Collimator Cone

Installation and adjustment of patient hand grips and collimator cone.

Troubleshooting and Specifications

System Faults and Operator Errors

Guidance for troubleshooting system faults and correcting operator errors.

Physical Room Requirements

Environmental and physical requirements for the room housing the equipment.

Radiation Protection Guidelines

Recommendations and responsibilities regarding radiation protection in X-ray rooms.

Technical Specifications Overview

Technical specifications for the Proteus XR/a system components.

Table, Generator, and Power Specifications

Specifications for tables, generators, and power supply requirements.

Console and OTS Specifications

Technical specifications for the system console and Over Head Tube Suspension.

Collimator Specifications

Specifications for Proteus XR/a automatic, manual, and Eclipse collimators.

Wall Stand and X-ray Tube Specifications

Specifications for wall stands and X-ray tubes used with the system.

Printer Specifications

Technical specifications for the Epson Model-180 printer.

Appendix

Contains supplementary information, such as housing cooling characteristics.

GE Proteus XR/a Specifications

General

Image Acquisition	Digital
Generator Power	50 kW
kV Range	40-150 kV
mA Range	10-630 mA
Exposure Control	Automatic Exposure Control (AEC)
Generator	High-frequency
Focal Spot Size	0.6 mm / 1.2 mm
Image Receptor	Digital
Weight Capacity	204 kg (450 lbs)
Dimensions	Varies depending on configuration
Software	GE Healthcare Software