Need help?Do you have a question about the GE PANDA and is the answer not in the manual?
General| Type | Infant Warmer |
|---|---|
| Manufacturer | GE Healthcare |
| Control Modes | Manual, Servo |
| Integrated Scale | Yes |
| SpO2 Monitoring | Optional |
| Bed Tilt | Yes |
| Heater Type | Ceramic |
| Alarms | Power Failure |
| Power Requirements | 100-240 VAC, 50/60 Hz |
| Model | PANDA |
| Resuscitation Options | Optional |
| Skin Temperature Probe Accuracy | ±0.3°C |
Details critical safety warnings, cautions, and notes for operating and servicing the equipment.
Details the physical components, ports, and connectors on the warmer unit.
Explains the function of various buttons, knobs, and display elements on the control panel.
Explains the operational capabilities and functions of the warmer system.
Outlines recommended maintenance intervals for operator and service tasks.
Provides step-by-step instructions for initial installation and pre-operational checkout.
Explains the procedure for calibrating the bed's integrated scale.
Instructions on how to access and navigate the service mode for diagnostics and settings.
Details various diagnostic tests for system components and software.
Using a PC for advanced diagnostics, software updates, and commands.
Steps for connecting a PC and accessing the command line interface.
Lists essential hand tools required for performing repair procedures.
Procedures for repairing various components within the heater housing.
Steps for disassembling and repairing components within the electronic enclosure.
Procedures for disassembling and repairing the probe panel housing.
Procedures for repairing components in the lower unit of bedded and freestanding models.
Details the performance specifications and standards for the SpO2 option.
General guidelines and safety standards for EMC compliance.
Accessing and navigating the service mode for diagnostics and configuration.
Utilizing a PC for advanced diagnostics and software updates via serial port.
Steps for preparing the wall structure for mounting the warmer bracket.
Instructions for securely mounting the wall bracket to the wall.
Steps for installing the heater head and ensuring correct alignment for optimal performance.
To Next Page
