Appendix E: Installing Wall Mount Units
Mattress Height Label Installation (for Installations with Bassinets)
E-10 Service Manual
E.5 Mattress Height Label Installation (for Installations with Bassinets)
1. Install one mattress height label on the wall as shown in Figure E-7. Place the bottom bar of the label
(indicating the minimum height) at 32” +/- .1” (81.30 cm +/- .25 cm) from the floor and vertically center
align the label with the center of the warmer head.
2. Install one mattress height warning label next to the mattress height label on the wall.
32.0" ± 0.1"
81.30 cm ± 0.25 cm)
BUMPER
MATTRESS
HEIGHT
LABEL
MATTRESS
HEIGHT
WARNING
LABEL
FIGURE E-7. Mattress Height Label Installation
To Next Page
Loading...
