GE PANDA

Appendix A: Specifications
SpO2 Specifications
Service Manual A-7
A.6.5 Masimo SpO
2
Cables and Probes
Note: The preceding list of accessories is provided for reference only, and is not a complete list of
compatible Masimo sensors. Use only RDSet, LNOP, or LNCS Masimo oximetry sensors for SpO
2
measurements.
A.6.6 Power Fail Recovery
When recovering from a loss of mains power during normal use, the warmer will return to operation using
previous SpO
2
settings within 30s from return of mains power. If mains power was removed for longer than
10 minutes, a normal power on sequence will occur instead of a mains power failure recovery.
Masimo SET 1 Cables GE Part Number
RD SET GE-05, PATIENT CABLE, 1.5M/5 FT MASIMO-RD-4084
RD SET GE-12, PATIENT CABLE, 3.6M/12 FT MASIMO-RD-4085
Masimo SET 2 Cables GE Part Number
RD SET MD20-05, PATIENT CABLE, 1.5M/5 FT MASIMO-RD-4103
RD SET MD20-12, PATIENT CABLE, 3.6M/12 FT MASIMO-RD-4104
Masimo Probes for both Masimo SET 1 and Masimo SET 2 GE Part Number
RD SET NEO, ADHESIVE SENSOR, BOX 20 MASIMO-RD-4003
RD SET NEO PT, ADHESIVE SENSOR, BOX 20 MASIMO-RD-4004
Masimo Tape Description GE Part Number
RD SET INF REPLACEMENT TAPES, BOX 102 MASIMO-RD-4046
RD SET NEO REPLACEMENT TAPES, BOX 102 MASIMO-RD-4047
RD SET NEO PT REPLACEMENT WRAPS, BOX 10 MASIMO-RD-4048