FIGURE 6-6. Probe Panel Housing
13
7
9
15
7
6
5
4
16
17
12
11
10
14
7
6
8
3
2
1
The above parts are included
in harness assemblies. Refer
to section 6.9.
1. Probe panel housing top...................................M1092523
(For units with the SpO
2
option, includes SpO
2
logo label.)
2. Jack ground plate ......................................6600-2134-500
3. Jack plate, Scale/ Pat. probe ................6600-2127-500
Jack Plate (Freestanding and
Wall Mount) ...................................................6600-2129-500
4. Tension clip..............................................................M1110360
5. Washer, M3 X 3.2 ID 0.5 ...........................6600-0712-402
6. Split ring washer M3 X 3.1 ID 0.8.........6600-0713-402
7. Screw, M3 x 8 Btn Hd,
SpO
2
ground.................................................6600-0706-405
8. Support post, SpO
2
only....................................M1080260
9. Star washer, M3 x 3.2 ID 0.4 Int............6600-0713-431
10. Washer, M4 x 4.3 ID 0.8............................6600-0712-403
11. Split ring washer M4 x 4.1, 0.9 ............. 6600-0713-403
12. Screw, M4 X 12 Skt Hd .............................6600-0707-410
13. Probe panel housing bottom................6600-2124-500
14. SpO
2
Shield, bottom ............................................M1104635
15. SpO
2
interface board/
Masimo SET 1 PCB..............................................M1092344*
16. SpO
2
Shield, top.....................................................M1104615
17. Jack plate, SpO
2
.........................................6600-2128-500
Jack plate, blank ........................................ 6600-2126-500
*SpO
2
interface and MASIMO SET 1 PCB are sold as a matched pair.
To Next Page
Loading...
Need help?
General
