GE PANDA Service Manual

A-1
Appendix A: Specifications
A.1 Power Requirements and Accessory Outlets
A.2 Operating Environment
A.3 User Control Settings
Power Requirements Accessory Outlets
5.25 A @ 100V ~, 50/60 Hz 2 A @ 100V ~, 50/60 Hz
4.57 A @ 115V ~, 50/60 Hz 2 A @ 115V ~, 50/60 Hz
2.39 A @ 220V ~, 50/60 Hz 1A @ 220V ~, 50/60 Hz
2.28 A @ 230V ~, 50/60 Hz 1 A @ 230V ~, 50/60 Hz
2.19 A @ 240V ~, 50/60 Hz 1A @ 240V ~, 50/60 Hz
Temperature 18 to 30°C
Humidity 5 to 75% Non-condensing relative humidity
Pressure 70-106 kPa
Air Velocity up to 0.3 m/s
Storage Conditions
Temperature -25 to 38°C
Humidity 0 to 85% Non-condensing relative humidity
Pressure 50 to 106 kPa
Electrical
Operation Continuous
Device Type Class 1
Applied Part Type BF
Patient control temperature 34-37.5°C in 0.1° increments
Radiant heat power 0-100% in 5% increments

GE PANDA Specifications

General

Type	Infant Warmer
Manufacturer	GE Healthcare
Control Modes	Manual, Servo
Integrated Scale	Yes
SpO2 Monitoring	Optional
Bed Tilt	Yes
Heater Type	Ceramic
Alarms	Power Failure
Power Requirements	100-240 VAC, 50/60 Hz
Model	PANDA
Resuscitation Options	Optional
Skin Temperature Probe Accuracy	±0.3°C