PROTEUS XR/a
GE MEDICAL SYSTEMS Operator Manual
REV 11 DIRECTION 2259724-100
5-12
5-2-5 Save/Retrieve
After entering procedures, it is a good practice to save them on a
diskette. The information may be transferred in similar rooms to reduce
the time spent making the next set of procedures. A specially formatted
disk is needed and supplied with each system.
Save
Insert the specially formatted APR diskette into the floppy Disk Drive.
1. Touch SAVE BACKUP to copy all procedure editing information
from the current room onto the diskette. This information will
overwrite any data that was already on the diskette.
Retrieve
Retrieve will read procedure editing information off a diskette and store it
in the system console computer memory.
1. Insert the diskette containing a previously saved Procedure Edit
Database into the floppy disk drive.
2. Touch the RETRIEVE BACKUP to copy all procedure information to
the system.
3. Touch the EXIT button to exit this menu.
Note: Remove the APR disk after completing the APR revision.
FOR TRAINING PURPOSES ONLY!
NOTE: Once downloaded, this document is UNCONTROLLED, and therefore may not be the latest revision. Always confirm revision status against a validated source (ie CDL).
To Next Page
Loading...
Need help?
General
