PROTEUS XR/a
GE MEDICAL SYSTEMS Operator Manual
REV 11 DIRECTION 2259724-100
5-16
5-3-5 APR
Press any APR button on main
screen
Enter the sub-APR interface and the
parameter display will not change
Press home in any sub-APR
interface
Go back to the upper interface
Press sub-APR button The button will be selected and the
parameter displayed will change
accordingly.
Insert the APR disk, then
press procedure edit button in
main screen.
Enter main screen edit interface, in this
screen, the parameter or technique can’t
be changed or selected.
Press name cat button and
then press any APR button
Enter the name edit interface and edit the
APR name (only in English)
Press Save/Retrieve button Enter save & retrieve backup interface
In save & retrieve interface:
press save button
Save the APR name to the floppy disk
In save & retrieve interface:
press retrieve button
If the floppy disk have the relative file, it
restore the file to system or it display error
In save & retrieve interface:
press exit button
Return to the main screen edit interface
In edit interface : Press edit
done button
Save the category name to the system
and return to the main screen interface
In sub-APR interface: press
procedure edit button
Enter the sub-APR procedure edit
interface
Press name proc and any sub-
APR name
Enter the name edit interface and edit the
name (only in English)
Press edit done button to save the
procedure name to the system and return
to the upper interface.
* Press home button will also return to
upper interface, but it will not save the
new procedure name.
Insert the specific floppy disk
and Press the save param
button
Save the parameter to the hard disk
Press the default button Save the receptor and patient size as the
default entrance of the relative sub-APR
Press edit done button Save the procedure name to the system
and return to the upper interface.
If error occurrence Display error message and reset button,
Only reset button is active in this state,
dispose the error and press reset button
to return.
FOR TRAINING PURPOSES ONLY!
NOTE: Once downloaded, this document is UNCONTROLLED, and therefore may not be the latest revision. Always confirm revision status against a validated source (ie CDL).