What causes intermittent regenerant draw in GE Water System?
If you experience intermittent or irregular regenerant draw with your GE Water System, it could be due to low water pressure. Set the pump to maintain 30 psi at the conditioner. Alternatively, the injector might be defective, requiring you to replace both the injector and injector cap.
General| Brand | GE |
|---|---|
| Model | Autotrol Performa ProSoft 960 Series |
| Category | Water System |
| Language | English |
Guidance on choosing an optimal location for the water conditioner unit.
Instructions for connecting the water supply to the conditioner.
Overview of how to program the control settings.
Details on Level I programming parameters accessible to the end-user.
Details on Level I parameters for the Performa 960 FA.
Common valve problems, their causes, and solutions.
Explanation of alarms, their causes, and solutions.
Detailed list of Model 960 alarms and troubleshooting steps.
Common issues, causes, and solutions for the control.
To Next Page
