Need help?Do you have a question about the GE AvantaPure and is the answer not in the manual?
General| Brand | GE |
|---|---|
| Model | AvantaPure |
| Category | Water System |
| Language | English |
Safety rules for electrical connections, plumbing, lubricants, and handling.
Safe practices for media tank, temperature, pressure, and water quality.
Specific warnings about assembly torque and lifting hazards.
Instructions and diagrams for connecting water lines using bypass valves.
Steps for connecting plumbing, drain, regenerant lines, and power.
Explains how water is conditioned in the resin bed.
Steps for performing a quick cycle to set up the control.
Initial procedures for startup, including bypass and regeneration initiation.
Instructions for filling the media tank and priming the system lines.
Final steps to ensure system operation and water clarity.
Causes and solutions for ERR 1 and ERR 3 controller error messages.
Addresses causes and solutions for brine tank overflow and water leaks.
Troubleshoots hard water leakage and issues with drawing brine.
Solutions for regeneration issues, low flow, and no conditioned water.
Addresses salt usage discrepancies and regenerant tank overflow.
To Next Page
