CHAPTER 3: IEC 61850 COMMUNICATION MODEL IMPLEMENTATION CONFORMANCE STATEMENT (MICS)
UR FAMILY – COMMUNICATIONS GUIDE 3-161
3
Table 3-178: Disconnect switch DiscCILO data objects
ctlModel CtlModels CF 0 (status only) R
Health INS This logical node’s health R
stVal ENUMERATED ST LPHD1.PhyHealth.stVal R
Pos DPC Disconnect position control and status R/Ctrl
stVal CODED ENUM ST Disc0XSWI#.Pos.stVal R
stSeld BOOLEAN ST The controllable data status is “selected” R
pulseConfig PulseConfig CF R
pulseConfig
.cmdQual
ENUMERATED 0 (pulse) R
pulseConfig.onDur INT32U 2 R
pulseConfig
.offDur
INT32U 0 R
pulseConfig
.numPls
INT32U 1 R
ctlModel CtlModels CF DiscCSWI# Pos ctlModel R/W/C
sboTimeout INT32U CF DiscCSWI# Pos sboTimeout R/W/C
sboClass SboClasses CF 0 (operate-once) R
operTimeout INT32U CF DiscCSWI# Pos operTimeout R/C
LNName: DiscCILO# LDevice inst: System UR element: Disconnect Control element #
data obj. data attribute Type FC UR Name Description R/W/C
Mod INC This logical node’s mode R/Ctrl
stVal ENUMERATED ST 1 (on) R
ctlModel CtlModels CF 0 (status only) R
Health INS This logical node’s health R
stVal ENUMERATED ST LPHD1.PhyHealth.stVal R
EnaOpn SPS Enable Open status R
stVal BOOLEAN ST The state of the operand selected by
setting XSWI# INTERLOCK OPN
R
EnaCls SPS Enable Close status R
stVal BOOLEAN ST The state of the operand selected by
setting XSWI# INTERLOCK CLS
R
InRef2 ORG XSWI# INTERLOCK OPN setting. R
GEORG R
setSrcRef ObjectReference SP XSWI# INTERLOCK OPN reference to the data attribute to input R/C
VISIBLE
STRING255
SP Reference to the ultimate source
of value selected by setting
XSWI# INTERLOCK OPN
R/C
setSrcCB ObjectReference SP source GoCB of input if via GOOSE R/C
VISIBLE
STRING255
SP If reference is external to this
IED, mapped to the source’s
GOOSE control block, else empty
string
R/C
cdcNs VISIBLE
STRING255
EX Name of the GE Multilin
namespace at the time of this
firmware release
R
cdcName VISIBLE
STRING255
EX GEORG R
InRef3 ORG XSWI# INTERLOCK CLS setting. R
GEORG R
setSrcRef ObjectReference SP XSWI# INTERLOCK CLS reference to the data attribute to input R/C
VISIBLE
STRING255
SP Reference to the ultimate source
of value selected by setting
XSWI# INTERLOCK CLS
R/C
setSrcCB ObjectReference SP source GoCB of input if via GOOSE R/C
LNName: DiscCSWI# LDevice inst: System UR element: Disconnect Control element #
data obj. data attribute Type FC UR Name Description R/W/C
To Next Page
Loading...
