1-1
Chapter 1
Components and User Controls
BiliSoft 2.0 Light Box
The Light Box contains the output LED module, a power supply, a cooling fan and temperature
protection circuitry.
The power supply is universal. The device can be supplied by any standard AC main power source.
The rated input voltage is 100-240VAC at 50/60 Hz. The rated input current is 0.25-0.75 Amps.
The LED module emits a very narrow band of blue light with no appreciable amount of ultraviolet or
infrared light. The LED module can only be activated when the pad connector is plugged into the
system.
The light box is cooled by a fan. A thermal sensor located on the LED module protects the device
from overheating. It also prevents operation if the temperature is below freezing.
To Next Page
Loading...