GE BiliSoft 2.0 - Soiled Pad Covers

A2-4
Installing Pad Nest Covers Onto Pad
1. Gently insert the BiliSoft 2.0 fiberoptic pad into a BiliSoft 2.0 Nest cover (shown below). The
back of pad should face away from the foot roll as shown.
For baby’s comfort and hygiene, never place a baby directly on the bare fiberoptic light
pad. The light pad should be covered with the BiliSoft Flat Pad Cover or Nest.
Soiled Pad Covers
Remove soiled disposable cover, replace with a fresh disposable cover. Wipe clean the fiberoptic pad
with baby wipes.
NEST COVER
FIBEROPTIC PAD
FOOT ROLL