GE BiliSoft 2.0 User Manual

9-3
0°, 45°, 90°, 135°, 180°,
225°, 270° and 315°
<5 % Ut (>95 % dip in Ut)
for 1.0 cycle AND
70% Ut (30% dip in Ut) for
0.5 sec
At a phase angle of 0°
<5% Ut (>95% dip in Ut) for
5 sec.
0°, 45°, 90°, 135°, 180°,
225°, 270° and 315°
<5 % Ut (>95 % dip in Ut)
for 1.0 cycle AND
70% Ut (30% dip in Ut) for
0.5 sec
At a phase angle of 0°
<5% Ut (>95% dip in Ut) for
5 sec.
If the BiliSoft 2.0
requires continued
operation during a
power outage, it is
recommended to use
an uninterruptible
power supply.
Power frequency (50/60
Hz) magnetic field
environment IEC
61000-4-8
30 A/m
30 A/m
Magnetic fields should
be at levels common
to a hospital or home
setting.
Radiated RF
electromagnetic fields IEC
61000-4-3
10 V/m over
80 MHz – 2.7 GHz
Modulation: 80% AM at 1
kHz
10 V/m over
80 MHz – 2.7 GHz
Modulation: 80% AM at 1
kHz
Radio devices such as
cell phones and
walkie-talkies should
not be used within 30
cm (12 inches) of the
BiliSoft 2.0 Light Box or
power cord
2
.
Conducted disturbances
induced by RF
electromagnetic fields IEC
61000-4-6
3 V rms over
150 kHz – 80 GHz
6 V rms in ISM and
amateur radio bands
between 150 kHz – 80 GHz
Modulation: 80% AM at 1
kHz
3 V rms over
150 kHz – 80 GHz
6 V rms in ISM and
amateur radio bands
between 150 kHz – 80 GHz
Modulation: 80% AM at 1
kHz
NOTE 1: Ut stands for the AC main voltage prior to application of the test level.
NOTE 2: The BiliSoft 2.0 should be observed to verify normal operation. If abnormal performance is
observed, additional measures may be necessary, such as reorienting or relocating the BiliSoft 2.0.

GE BiliSoft 2.0 Specifications

General

Brand	GE
Model	BiliSoft 2.0
Category	Personal Care Products
Language	English