To Next PageTo Next Page
Need help?Do you have a question about the GE CDWT980R10SS and is the answer not in the manual?
General| Brand | GE |
|---|---|
| Model | CDWT980R10SS |
| Category | Dishwasher |
| Language | English |
Read all instructions completely and carefully before starting installation.
Read and observe all cautions and warnings. Wear safety glasses or goggles.
Lists components provided with the dishwasher installation.
Lists necessary materials for dishwasher installation.
Lists essential tools required for dishwasher installation.
Details requirements for the cabinet opening, including dimensions and clearances.
Specifies minimum clearance requirements around the dishwasher.
Instructions for preparing the drain plumbing, including hose length and loop requirements.
Specifies requirements for the drain hose and loop height.
Describes different drain installation methods based on local codes.
Illustrates air gap installation with a waste tee or disposer.
Illustrates high drain loop installation with a waste tee or disposer.
Instructions for preparing the electrical wiring and connections.
Details electrical specifications for the dishwasher.
Guidance on preparing the cabinet for electrical wiring.
Instructions for making the final electrical connection to the appliance.
Guidance on preparing the hot water supply line for connection.
Details on routing and connecting the hot water supply line.
Steps for connecting the hot water supply line to the dishwasher.
Locate and set aside all items included in the installation package.
Instructions for attaching the trim pieces to the dishwasher tub.
Adjust spring tension to ensure the dishwasher door opens and closes smoothly.
Remove the wood base and install the dishwasher's leveling legs.
Remove the toekick from the dishwasher for later reinstallation.
Remove the toekick brace if the model includes a sound upgrade kit.
Connect the power cord to the dishwasher's junction box.
Install the 90° elbow fitting onto the water valve using thread seal tape.
Route water line and house wiring to avoid interference under the dishwasher.
Connect the drain hose to the dishwasher's drain pump outlet.
Insert the drain hose and power cord (if used) through the cabinet opening.
Slide the dishwasher into the cabinet opening, checking for kinks and interference.
Push the dishwasher fully into the cabinet, centering it and checking door alignment.
Guidance for aligning top-mount control models with countertop gap.
Level the dishwasher using the adjustable legs for optimal performance.
Secure the dishwasher to the countertop or cabinet sides.
Connect the water supply line to the dishwasher's water inlet valve.
Connect the drain hose to the waste tee, disposer, or air gap.
Connect the house wiring to the dishwasher's junction box.
Review a checklist to ensure proper installation before operation.
Perform a wet test to check for leaks and proper operation.
Calibrate the dishwasher based on water hardness using a test strip.
Attach the sound upgrade kit for enhanced noise reduction.
Reinstall the toekick to ensure quiet dishwasher operation.
Ensure all literature, instructions, and samples are left with the consumer.
