GE Concord express

Setting the Date and Time
Program Time
1) Press the menu button on the key pad (9)
2) Enter the master code (default is 1234)
3) The display should show Time-Date
4) Press the # button (the display shows the programmed
time)
5) Enter the desired time in 24 hour format (00:00 ex
13:01 is 1:01pm) press # to set
6) Press * button until display shows Time-Date
7) Press the A or B button until the display shows end
program
8) Press the # button
Program Date
1) Press the menu button on the key pad (9)
2) Enter the master code (default is 1234)