GE Concord 4 User Manual

GE Concord 4 Quick User Guide Page 1
04/04/14
GE Concord 4
Quick User Guide

GE Concord 4 Specifications

General

Zones	96
Partitions	6
User Codes	230
Power Supply	16.5 VAC, 40 VA
Wireless Compatibility	Compatible with GE wireless sensors
Keypads	Up to 8
Outputs	2 onboard, expandable
Event Log	512 events
Backup Battery	12VDC, 7AH
Communication	Phone line, optional cellular or IP

Summary

Before Calling

Disarm the System

Arming & Disarming the System

Level 1 - Off

Cancel alarm, stop sirens, or disarm system when entering premises or before opening door/window.

Level 2 - Stay

Arm perimeter doors/windows only. Close all, enter code, display shows 'Armed to Stay'.

Level 3 – Away

Arm all sensors (perimeter & interior motion). Close all, enter code, display shows 'Armed to Away'.

Bypassing Zones

Sensor Reset

Clear Wireless Smoke Sensors

Press 1 + CODE to clear wireless smoke sensor alarms. Stops sirens if active.

Clear Hardwired Smoke Sensors

Press 1 + CODE twice to reset hardwired detectors and clear memory.

Access Codes

Master Access Code

Can add/delete user codes, change settings. Cannot be deleted.

User Access Codes

System supports up to 229 individual user codes for access.

To Delete a User Access Code

Keypad Panic Buttons

Time Programming (System Clock)

Date Programming (System Date)

Chime Mode

System Status Check

Trouble Conditions

PROCEDURES AND PROCESSES

WHO WILL CALL ME WHEN I HAVE AN ALARM?

Information on alarm monitoring verification calls and dispatcher contact.

PROCESSES

Instructions for cancelling alarms, placing accounts on test, or inquiring about signals.