Light ring will continuously flash blue until the switch is added to
the C by GE app.
Light ring will flash red if the circuit is overloaded.
Max load rating 1.25 amps for LED and 5 amps for incandescent/halogen.
Light ring will not illuminate if wired incorrectly.
IF LIGHTS DON’T TURN ON:
1. Check that power to the switch is on at the breaker.
2. Turn power off at the breaker, return to the switch to confirm the wires
are securely and properly wired according to the installation guide.
3. Go to cbyge.com/switch-support for more troubleshooting.
To Next Page
Loading...
