DVSR xU User Manual 87
Figure 59: The Text insertion capturing options – Receive data sent by ATM/POS through serial port
d. Receive the command sent by ATM through serial port: Select OK and return to the System
menu. See Figure 60.
Figure 60: The Text insertion capturing options – Receive the command sent by ATM/POS through
serial port
To configure the RS-232
The following procedure shows how to change the RS-232 settings from the RS-232 submenu. The
pre-populated default values are for GE ProBridge. The RS-232 settings can be changed in any order.
1. In the System menu go to the RS-232 setup box and press Enter or left-click the mouse. The RS-
232 submenu appears. See Figure 61.
To Next Page
