GE E4-8800 User Manual

21
4. Reinstall the end caps by using non-petroleum based lubricant to lubricate the
O-ring inside the end cap. Reinstall the end cap on the membrane element by
first, aligning the stinger into the hole in the end cap and then turn the end
cap slowly clockwise, as you push it down into the membrane element
housing.
5. Reattach the housing clamp and tighten.
6. Next reconnect the permeate and concentrate lines.
The machine is ready for start-up.

GE E4-8800 Specifications

General

Brand	GE
Model	E4-8800
Category	Water Filtration Systems
Language	English