DEH41549 R05
EntelliGuard * R Retrofill
Circuit Breakers 800-5000A
Installation Manual for R3 & R6 Type Retrofill Circuit Breakers replacing
Drawout Letter Code B, D & F Legacy AKR Circuit Breakers used in
AKD-8 & Substructures.
General Electric AKD-8 Low Voltage Switchgear is a free-standing
assembly of metal-enclosed power circuit breakers. It may also be
part of a single-ended or double-ended load center unit substation.
This manual applies to EntelliGuard R breakers to be used in AKD-8
Switchgear & substructures found in OEM Equipment and GE
Switchboards using legacy AKR circuit breakers of the following types:
800-2000A, AKR-#D-30/50/T50 circuit breakers in all Equipment types.
3200, 4000 & 5000A, AKR-#D-75/100/125 for AKD-8 switchgear,
AKR-#B-75/100/125 types in OEM equipment and AKR-#F-75/100/125
types in GE switchboards.
(# is shown in place of a number which designates the trip unit type.)
Need help?
General
To Next Page
