Electrophoresis Power Supply EPS 3501 XL Operating Instructions 28-9639-69 AA 23
Installation 3
Site requirements 3.1
3 Installation
EPS 3501 XL is delivered in protective packing material and shall be unpacked with
great care.
Any equipment connected to EPS 3501 XL must fulfill applicable standards and local
regulations.
For detailed information on Installation, see Electrophoresis Power Supply EPS 3501 XL
User Manual.
3.1 Site requirements
3.2 Unpacking
• Check the equipment for damage before starting assembly and installation.
• Document any damage and contact your local GE Healthcare representative.
Remove straps and packing material and stand equipment upright before starting
installation.
3.3 Transport
Before moving the system: disconnect all connected cables.
Parameter Requirement
Electrical power 100-240 V, 50-60 Hz
Ambient temperature 4°C to 40°C
Placement Stable laboratory bench
Humidity 0 to 95 %, non-condensing
To Next Page
Loading...
