Need help?Do you have a question about the GE Bently Nevada 3500/15 Series and is the answer not in the manual?
General| Output Voltage | 24 VDC |
|---|---|
| Humidity | 5% to 95% non-condensing |
| Operating Temperature Range | -20°C to +70°C |
| Storage Temperature Range | -40°C to +85°C |
| Protection | Overvoltage, Overcurrent, Short Circuit |
| Certifications | CE, UL, CSA |
Visually inspect the module for obvious shipping damage. File a claim if damage is detected.
Observe precautions to prevent electrostatic discharge damage to circuit boards during handling and storage.
Details the three available power supply versions: AC, High Voltage DC, and Low Voltage DC.
Guidance on operating the 3500 system with a single power supply, recommending the upper slot.
Explanation of how dual power supplies provide backup and ensure continuous rack operation.
Requirements for CE compliance, including industrial environment and power factor correction.
Ensuring correct orientation of the PIM Connector Shield for Low Voltage Directive compliance.
Describes the Power Supply configuration field on the Rack Interface Module and available options.
Information on the Low Voltage AC Power Input Module for 85-132 Vac rms input.
Information on the High Voltage AC Power Input Module for 175-264 Vac rms input.
Information on the High Voltage DC Power Input Module for 88-140 Vdc input.
Information on the Low Voltage DC Power Input Module for 20-30 Vdc input.
Procedure for connecting a single-point ground using the Power Input Module switch to avoid ground loops.
How to verify that power supplies and Power Input Modules are operating correctly.
Describes system event messages related to power supply installation, removal, or faults.
Describes how to troubleshoot issues with the power supply or Power Input Module.
Checks to perform if the Power Supply OK LED is off, including voltage, PIM type, and fuse checks.
Steps to take if problems persist, including checking for faulty original supply or damaged PIM.
Details the part number structure and options for ordering 3500/15 Power Supplies.
List of available spare parts, including modules, fuses, and manuals.
Details out-of-range protection, max input power, and volt-amps for all power supply versions.
Specifies input voltage, frequency, current, power, efficiency, and power factor for LV AC.
Specifies input voltage, frequency, current, power, efficiency, and power factor for HV AC.
Specifies input voltage, current, power, and efficiency for LV DC.
Specifies input voltage, current, power, and efficiency for HV DC.
Indicates that the Supply OK LED indicates proper operation.
Specifies operating and storage temperature and humidity ranges.
Details compliance with EMC directives, including EN50081-2 and EN50082-2 standards.
Details compliance with Low Voltage Directives, specifically safety requirements.
Lists agency approvals such as CSA-NRTL/C for Class I, Division 2 environments.
Provides dimensions and weight for the 3500 Power Supply Module.
Provides dimensions and weight for the 3500 Power Input Modules.
Describes the special half-height slots required for power supplies and PIMs in the rack.
States that the 3500 power supplies require no minimum rack load.
To Next Page
