Section 8 - Specifications
8. Specifications
8.1 Inputs
8.1.1 All Power Supply Versions
Out of Range
Protection
For all power supply versions, an undervoltage will
not harm either the supply or the PIM. However, an
overvoltage will cause the fuse to open on the PIM.
Maximum Input Power
Maximum output power / Minimum efficiency
Maximum Volt-Amps
Maximum input power / Minimum power factor
8.1.2 Low Voltage AC
Input
85 to 132 Vac rms (120 to 188 Vac pk)
Note that installations using AC Power Input Modules
(PIMs) prior to Rev. R and/or AC Power Supply
Modules prior to Rev. M require a voltage input of 85
to 125 Vac rms
Frequency
47 to 63 Hz
Input Current
4.5 A rms maximum
Input Power
194 W maximum
Efficiency
0.8 minimum, typical
Power Factor
0.5 minimum, typical
21
To Next Page
Loading...
