3500/15 AC and DC Power Supplies Operation and Maintenance Manual
Refer to the 3500 Field Wiring Diagram Package for specifics on connecting power
to this Power Input Module.
4.2 AC Power Input Module (High Voltage Version)
Use the high voltage AC Power Input Module, shown in Figure 4-2, when you will
use high voltage ac (175 to 264 Vac rms) to power the rack.
DANGER
Failure to properly ground the rack chassis may result
in high voltages on exposed surfaces of the 3500 rack.
High voltages can result in shock, burns, or death.
Always connect the metal rack chassis grounding
strap as shown in Figure 4-2 to avoid shock hazard.
1
1. Chassis grounding strap (see Safety Notice)
Figure 4-2: High Voltage AC Power Input Module
4.3 DC Power Input Module (High Voltage Version)
Use the high voltage DC Power Input Module, shown in Figure 4-3, when you will
use high voltage dc (88 to 140 Vdc) to power the rack.
10
To Next Page
Loading...
