GE Everest XLG3 VideoProbe User Manual

150 Appendix F Optical Tips GE Inspection Technologies XLG3 VideoProbe System
6.2mm Internal Working Channel Feature
The internal working channel is available in the 6.2mm tip models. This channel has a
1.6mm ID and allows the use of micro-tools together with forward-viewing optical tips to
perform a number of measurement and retrieval tasks.
The tools are designed to be installed from a specified end of the probe, depending on the
particular tool. The following interchangeable tools, as shown below, are available for
6.2mm probes:
a. 4mm and 8mm magnetic retrieval tools
b. 3-prong gripper
c. hook tool
d. 0.055 inch comparitor gauge
e. small alligator
f. large alligator
g. loop/snare
h. brush
i. shim
abcde f g h i

GE Everest XLG3 VideoProbe Specifications

General

Brand	GE
Model	Everest XLG3 VideoProbe
Category	Diagnostic Equipment
Language	English