5-12
Chapter 5 Diagnostic Interface-Keypad GEH-6632 EX2100 User’s Guide
2. Press Enter to make a backup copy of the parameters or Escape to cancel.
Ø To restore a parameter from backup
1. Stop the exciter. (This function cannot be executed with the exciter running.)
2. From the Main Menu, select Parameter Backup Functions then select Restore
Parameters from Backup.
Press to restore Parameters from Backup
-- WARNING --
The active parameter values will be
replaced, and can not be recovered.
Press ENTER to continue. ESC cancels.
3. Press Enter to restore the backup parameters or Escape to cancel.
Restoring parameters from a backup file overwrites the
currently active parameter values, which cannot then be
restored.
Ø To compare the active parameter set to the backup parameter set
1. From the Main Menu, select Parameter Backup Functions then select
Compare Current Parameters to Backup.
BACKUP DIFFERENCES <More
↑
>
VHiTripLev = 1.3
Backup value = 1.2
AFFL = 112.0
Backup value = 100.0
VFFL = 110.0
Backup value = 100.0
<More
↓
>
2. Use the Up and Down Arrow buttons to scroll through the list of backup
differences.
3. Press Escape to return to the previous menu.
To Next Page
Loading...
Need help?
General
