GE G3WP - Reset Settings; FW Version (Firmware Version)

65
FW Version (Firmware Version)
Use this setting to view the current camera rmware version.
1. Select the
FW Version setting from the Setup menu as
described previously.
2. If SD card contains a new version of rmware, please
upgrade accordingly as necessary.
To update to the latest rmware version, you can go
to the following website: http://www.general-imaging.
com/us/supportDetail.aspx?id=435
Reset Settings
Use this setting to restore the camera to its default settings.
1. Select the
Reset setting from the Setup menu as
described previously.
2. Use the
Up/Down navigation buttons to select Yes or No.
Then press the button to conrm.