27
Oven light
NOTE: The glass cover should be removed only
when cold. Wearing latex gloves may offer a
better grip.
The light bulb is located on the back of the
oven. Before replacing the bulb, disconnect
electrical power to the range at the main fuse
or circuit breaker panel.
Let the bulb cool completely before removing
it. For your safety, do not touch a hot bulb with
a damp cloth. If you do, the bulb will break.
To remove:
Turn to remove the cover, then remove the bulb.
To replace:
Put in a new 40-watt appliance bulb. A 40-watt
appliance bulb is smaller than a standard
40-watt household bulb.
Install and tighten the cover.
Reconnect electrical power to the range.
Broiler pan
and grid
After broiling, remove the broiler pan from the
oven. Remove the grid from the pan. Carefully
pour out the grease from the pan into a proper
container. Wash and rinse the broiler pan and
grid in hot water with a soap-filled or plastic
scouring pad.
If food has burned on, sprinkle the grid with
detergent while hot and cover with wet paper
towels or a dishcloth. Soaking the pan will
remove burned-on foods.
The broiler pan may be cleaned with a
commercial oven cleaner. The grid is chrome;
do not use an oven cleaner to clean it.
Both the broiler pan and grid can also be
cleaned in the dishwasher.
Do not store a soiled broiler pan and grid
anywhere in the range.
Glass cover
Bulb
Socket
3
1
⁄2″ Max. length
To Next Page
Loading...
Need help?
General