88 /
Copyright General Electric 2011
9/23/2012
Wash / Circulation Pump
Circulation Pump: 120 VAC, .8 amp – 3.8 LRA, 8GPM @ 5PSI
Wash pump will cycle to allow proper Diverter operation, this allows for
peak performance (See Diverter operation)
Pump Removal:
Remove Door
Remove sump
Release tension on pump inlet clamp
Release tension on pump outlet clamp
Slide pump hanger from sump module
*Make sure both Wash and Drain pump shields are installed during re-assembly
To Next Page
Loading...
