Dishwasher Installation
Figure CC
STEP 20: REPLACE TOEKICK
• Place toekick against the legs of the dishwasher.
Attachment
Screws
Toekick
• Align the toekick with the bottom edge and make sure it is
against the oor.
• Insert and tighten the 2 toekick attachment screws. The
toekick should stay in contact with the oor.
Tip: Reduce sound from under the dishwasher.
Make sure toekick is against floor.
STEP 21: LITERATURE
• Be sure to leave complete literature package, these
Installation Instructions and product samples and/or coupons
with the consumer.
13
To Next Page
Loading...
